200
T-010
OVERALL
ITEM P/N DESCRIPTION QTY UM
1 10342 TUBING, 3/8" OD X 1/4" ID, POLYETHYLENE 1.00 FT
2 10746 BRACKET, PUMP 2.00 EA
3 1364001 BASE SUB-ASSY. PB100-0 1.00 EA
4 1450318 BELT 1.00 EA
5 1600312 BOLT, HH, 1/4-20 X 3/4 SS 8.00 EA
6 1600324 BOLT, HH, 1/4-20 X 1-1/2 SS (CAP SCREW) 2.00 EA
7 1600366 BOLT, HH, 1/4-20 X 1 SS 4.00 EA
8 1890001 BUMPER, RUBBER 4.00 EA
9 1983001 CABLE ASSY, 110V, 8FT GROUNDED, MALE PLG,
16/3
1.00 EA
10 1984005 CABLE ASSY. 1.00 EA
11 ******* CHAMBER ASSY., MIXING (SEE SECTION) 1.00 EA
12 2383001 CHASSIS, BACK 1.00 EA
13 2383002 CHASSIS, FRONT 1.00 EA
14 26033 VALVE 1.00 EA
15 2896006 CONTROLLER, REM-1D 1.00 EA
16 2930004 CPLG, PVC, SCH 80 1/2"FPT 1.00 EA
17 2930420 CPLG, RED, SS 1/2 X 1/4 FT X T 1.00 EA
18 3579864 ELBOW, CONDUIT 1.00 EA
19 3581604 ELBOW, 90, BRASS 3/8 OD X 3/8 MPT 1.00 EA
20 4681310 BELT GUARD 1.00 EA
21 5551209 LABEL, WATER FLOW 2.00 EA
22 5551210 LABEL, POLYBLEND 1.00 EA
23 5554000 LABEL, SERIAL PLATE 1.00 EA
24 5902001 MOTOR 1.00 EA
25 5963028 NIPPLE, SS 1/4" X 4" 1.00 EA
26 6020031 NUT, 1/4-20, HEX SS 6.00 EA
27 6020962 NUT, 8-32, HEX 2.00 EA
28 7771558 SCREW, MACH, SS PAN HD, PHIL, 8-32 X 1/2 2.00 EA
29 7772506 SCREW, MACH, 304SS, PAN HD, SLTD, 10-32 X 3/8 2.00 EA
30 7772508 SCREW, MACH, 10-32 X 1/2, SLTD PH, SS 8.00 EA
31 8140001 SPACER 2.00 EA
32 8141001 SPACER, MOTOR SHIM 3.00 EA
33 8724903 SWITCH, DIFF. PRESSURE 1.00 EA
34 9414002 TUBE BRAIDED SS, 1/2" MPT X 3/8" MPT X 14" LG* 1.00 EA
35 9571301 VALVE SOLENOID 1.00 EA
36 9740300 WASHER, SS, FLAT 1/4" 9.00 EA
37 9740330 WASHER, SS, INT TOOTH, 1/4" 4.00 EA
38 9748300 WASHER, SS, FLAT 1/8" 1.00 EA
39 ******* PUMP (SEE SECTION) 1.00 EA
40 RM2702060 CONDUIT, SEALTITE 3/8" 1.00 FT
41 RM9414061 TUBE, RIGID 304 SS 3/8"OD X 1/4"ID 1.00 FT
42 ******* FLOWMETER (SEE SECTION) 1.00 EA
43 1672002 BOX JUNCTION SUB-ASSY. 1.00 EA
44 ******* STATIC MIXER ASSY., (SEE SECTION) 1.00 EA
To Next Page
Loading...
Need help?
General
