Siemens QMX3.P30 - Product Specifications and Compliance; Interfaces, Standards, and Environment; Physical Attributes and Regulatory Notes

14 / 46
Siemens Wall-mounted sensors and room operator units for KNX/ETS and KNX/ACS CM2N1602en_05
Building Technologies Mounting and electrical installation 2018-09-14
Cable ducts on the wall
30 mm
Keep a distance of 30 mm (from above) /
20 mm (from below) to the base plate,
so that the device can be snapped onto the
base plate.
S
ample icons are available in the label
template M1602.1 (Download from
www.siemens.com/gamma-td
)
Information. e.g. on room operator unit
location or on room type
(free text)
M
ax
. 6
5
9
.2
±
0
.1
5
1
6
0
2
z
11
0
54 ± 0.15
Dismounting / service:
Labels for QMX3.P02,
QMX3.P37
Insert label
1602Z106
1602J109