Siemens QMX3.P30 - Room Temperature, Humidity and Air Quality Control

24 / 46
Siemens Wall-mounted sensors and room operator units for KNX/ETS and KNX/ACS CM2N1602en_05
Building Technologies Functionality / Use 2018-09-14
4.5.3 Room temperature, humidity and air quality control
Key (Possible combination of components)
1. Room sensor QMX3.P70, including – Temperature sensor
– Humidity sensor
– CO
2
sensor
2. Air handling controller RMU7x0B
The room operator unit (1) measures the room temperature, the room humidity,
and the CO
2
concentration, and passes these values on to the controller (2) via the
KNX bus. The controller controls temperature, humidity and air quality of the
corresponding room based on the measured values.