Siemens RDG20 KN Series - Accessories; Equipment Combinations

Overview
Accessories
2
14 | 186
A6V11545892_en--_e
2.3 Accessories
Product
series
Type
Product/stock no.
Datasheet
RDG2..KN
KNX power supply 160 mA
(Siemens BT LV)
5WG1 125-1AB02
TPI_N125
KNX power supply 320 mA
(Siemens BT LV)
5WG1 125-1AB12
TPI_N125
KNX power supply 640 mA
(Siemens BT LV)
5WG1 125-1AB22
TPI_N125
RDG2..KN
RDG2..T
Mounting adapter for
RDG2..KN and RDG2..T
ARG200: S55770-
T438
1
）
-
1
）
ARG200 mounting adapter is used to wall-mount the RDG2..KN and RDG2..T
where a conduit box is not available. For easier wiring, removable knockouts on all
sides are available. For dimensions, see Dimensions [➙ 183].
2.4 Equipment combinations
Type of unit
Product no.
Datasheet
*)
Cable temperature or changeover
sensor, cable length 2.5 m NTC (3
kΩ at 25 °C)
QAH11.1
1840
Cable temperature sensor PVC 2 m,
LG-Ni1000
QAP22
1831
Room temperature sensor NTC (3
kΩ at 25 °C)
QAA32
1747
Room temperature sensor LG-
Ni1000
QAA24
1721
Front modules with passive
temperature measurement LG-
Ni1000
AQR2531ANW
1408
Strap-on temperature sensor LG-
Ni1000
QAD22
1801
Condensation monitor
QXA21..
A6V10741072
Flush-mount KNX room sensor (base
and front module)
AQR2570N..
AQR2532NNW
AQR2533NNW
AQR2535NNW
1411
Wall-mounted KNX sensors
QMX3.P30
QMX3.P70
1602