For commissioning and modification of older set of RDG SW versions, see
workflow in PCT Go – Smartphone app [➙ 158].
5.1 ETS
ETS is an engineering tool to fully commission RDG2..KN room thermostats.
ETS can implement the following functions:
● Define and download the physical address
● Define and download the application (plant type, control sequence)
– For partial download, ensure the application uses the same DIP switch
setting
● Set up and download thermostat control parameters
● Set up and download group addresses
This document does not describe how to operate ETS and set up a device. Refer
to the KNX Manual [5] [➙ 6] for more details.
ETS can be updated online.
To Next Page
Loading...
