Example 1:
The 1
st
schedule is 8:00…12:00 and the 2
nd
is 13:00…17:00. If the newly added
schedule starts at 10:00 and ends at 12:30, the schedule order is 1
st
schedule
(8:00…12:30) and 2
nd
schedule (13:00…17:00) after the change is confirmed by
pressing .
Example 2:
The 1
st
schedule is 8:00…12:00 and the 2
nd
is 13:00…17:00. If the newly added
schedule starts at 10:00 and ends at 13:30, the schedule is 8:00…17:00 after the
change is confirmed by pressing .
For apartments with local scheduler and time / date synchronization via KNX
(RDG2..KN)
When the local scheduler is enabled (P005):
● When P002 (operation via room op. selector) = 1 or 2, the manual selected
operating mode on the HMI remains in that mode until the user intervention to
select a new operating mode. P002 = 3 is no longer available.
● When Auto is selected, the thermostat works according to the local scheduler
(operating mode switches between Comfort or Economy).
● In Auto Comfort, changing the setpoint value does not switch the operating
mode to Comfort permanently.
● In Auto Economy, changing the setpoint value switches the operating mode to
Auto Comfort with the new setpoint. Temporary timer symbol is displayed.
Selecting green/red leaf function resets operating mode back to Auto Economy.
The local scheduler takes priority over the bus scheduler. KNX room "op.mode:
scheduler" has no impact on the operating mode.
4.6.8 M/S, manager/subordinate (RDG2..KN)
The M/S - manager/subordinate function has the following features:
● For large rooms / open spaces, to save energy by synchronizing HVAC
equipment and avoid running different equipment in heating and cooling at the
same room.
● The manager provides the room temperature, setpoint, operating mode heating
/ cooling sequence and humidity value and manual fan speed setting (if
requested) to all subordinates in the same group.
● When P008 (standard display) is set to 1 (Setpoint), the current Comfort
setpoint is always displayed, even if the thermostat works in a different
operating mode.
● A group includes max.1 manager and 9 subordinates.
To Next Page
Loading...
Need help?
General
