Siemens RUGGEDCOM RS900 - RUGGEDCOM RS900 CSA;Sira and ATEX Hazardous Location Approvals; RUGGEDCOM RS900 European Union (EU) Directive Compliance

RUGGEDCOM RS900
Installation Guide
Chapter 6
Certification
Approvals 29
Certification
The RUGGEDCOM RS900 device has been thoroughly tested to guarantee its conformance with recognized
standards and has received approval from recognized regulatory agencies.
CONTENTS
• Section6.1, “Approvals”
• Section6.2, “EMC and Environmental Type Tests”
Section6.1
Approvals
This section details the standards to which the RUGGEDCOM RS900 complies.
CONTENTS
• Section6.1.1, “CSA”
• Section6.1.2, “CSA/Sira”
• Section6.1.3, “European Union (EU)”
• Section6.1.4, “FCC”
• Section6.1.5, “FDA/CDRH”
• Section6.1.6, “ISED”
• Section6.1.7, “TÜV SÜD”
• Section6.1.8, “ACMA”
• Section6.1.9, “RoHS”
• Section6.1.10, “Other Approvals”
Section6.1.1
CSA
This device meets the requirements of the following Canadian Standards Association (CSA) standards under
certificate 16.70065161:
• CAN/CSA-C22.2 No. 60950-1
Information Technology Equipment – Safety – Part 1: General Requirements (Bi-National Standard, with UL
60950-1)