Siemens RVA47.320 - Configuration of Plant; Continuous Display

134/166
Siemens Building Technologies Basic Documentation RVA47.320 CE1P2379E
HVAC Products Description of the OEM settings 15.07.2002
Configuration of plant
6.9 Continuous display
• Selection of value for the continuous display.
Determines to kind of information to appear on the continuous display.
1. Press the line selection buttons to select operating line 90
OEM
.
2. Press the + / - buttons to select the required continuous display.
Setting range Unit Factory setting
0 / 1 - 0
This setting changes the continuous display of the device. It appears when no
operating line is selected.
0 Day / time of day
The continuous display shows the weekday (1...7 = Mo...Su) and the time of
day.
1 Cascade flow temperature sensor (common flow temperature sensor)
The continuous display shows the temperature measured with the cascade flow
temperature sensor (B10)
When connecting several BMUs to the controller, the continuous display always shows
the cascade flow temperature. In that case, setting 0 can be no longer selected.
04
812162024
Benefit
Description
Setting
Effect
 Caution!