Siemens RVA47.320 - Page 14

14/166
Siemens Building Technologies Basic Documentation RVA47.320 CE1P2379E
HVAC Products Handling 15.07.2002
• Check to ensure the fixing levers
are turned inward
• Check to make certain there is
sufficient space between the front
panel and the fixing levers
2379Z12
• Slide the unit into the panel cut-out
without applying any force
 Note:
Do not use any tools when inserting
the unit into the cut-out. If it does not
fit, check the size of the cut-out and
the housing.
2379Z13
• Secure the fixing levers by
tightening the two screws on the
front of the controller.
 Note:
Tighten the screws only slightly .
When tightening the screws, the
fixing levers automatically assume
their correct positions.
2379Z142379Z14
2. step
3. step
4. step