Siemens S65 - Accept Call; Reject Call; Swap between 2 Calls

©
Siemens AG 2003, M:\Mobil\R65\S65_Penelope\am\fug\_von_itl\S65_Phone.fm
35Calling
VAR Language: am; VAR issue date: 040517
left page (35) of S65 FUG us, A31008-H7400-A40-1-4A19 (02.06.2004, 19:50)
Accept call
The phone must be switched on. An
incoming call will interrupt any other
use of the phone.
C Press.
Or
A
Press.
A phone number transmitted by the
network plus the corresponding
name (possibly with a picture) are
displayed if they are stored in the
Phonebook/Addressbook (p. 42).
Reject call
§Reject§ Press.
Or
B
Press briefly.
Handsfree
You can put the phone down during
a call. You can then hear the caller
via the loudspeaker.
§Handsfr.§ Activate speakerphone
talking.
C Switch on.
I
/kl Adjust the volume with
the joystick or the plus/
minus key.
§Handsfr.§ Deactivate.
Swap between 2 calls
Establish a second connection
You can call another number during
a call.
C Open call menu.
Hold The current call is put on
hold.
J
Now dial the new phone
number or select
C Open the call menu,
then select Default book,
and then choose the
phone number.
When the new connection is
established:
§Toggle§ Swap between calls.
Warning!
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing
from loud ringtones.
Additional information
*
Press and hold to switch off
the ringtone and silent alert.
Â
Missed call display.
Warning!
Always switch off "speakerphone talking"
before holding the phone to your ear!
Otherwise, you will damage your hearing!