Siemens S65 - Minute Beep

©
Siemens AG 2003, M:\Mobil\R65\S65_Penelope\am\fug\_von_itl\S65_CallSetup.fm
93Setup
VAR Language: am; VAR issue date: 040517
left page (93) of S65 FUG us, A31008-H7400-A40-1-4A19 (02.06.2004, 19:50)
All calls
b
All calls are forwarded.
Ç
Symbol in the top line of
the display in standby
mode.
Not reachable
Calls are forwarded if phone is
switched off or out of range.
No reply
A call is only forwarded after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5-second intervals.
Busy
Call forwarding occurs if a call is in
progress. If Call waiting is activated
(p. 34), you will hear the call waiting
tone during a call (p. 36).
Receiving fax
b
Fax calls are forwarded to a number
with a fax connection.
Receiving data
b
Data calls are forwarded to a phone
number with a PC connection.
Call screening b
Only calls from phone numbers that
are in the Phonebook/Addressbook
or are assigned to a group are
signaled. Other calls are only dis-
played.
Any key
Incoming calls can be accepted by
pressing any key (except for
B).
Minute beep
During the call, you will hear a beep
after each minute as a reminder of
the time elapsed. The person you are
talking to does not hear this beep.
Additional information
Note that the forwarding is stored in the
network and not in the phone (e.g. when
the SIM card is changed).
Reactivate call forwarding
The last forwarded call has been stored.
Proceed as with "Set call forwarding". The
stored phone number is displayed. Confirm
number.