Siemens SCALANCE XP-200 - Page 32

Description of the device
2.3 LED display
SCALANCE XP-200
32 Operating Instructions, 05/2016, C79000-G8976-C428-01
Meaning in display mode B
In display mode B, the port LEDs indicate the transmission speed.
LED color
LED status
Meaning
-
Off
Port operating at 10 Mbps
Green On Port operating at 100 Mbps
Orange
On
Port operating at 1000 Mbps
If there is a connection problem and the type of transmission is fixed (autonegotiation off),
the desired status, in other words the set transmission speed (1000 Mbps, 100 Mbps, 10
Mbps) continues to be displayed. If there is a connection problem and autonegotiation is
active, the port LED goes off.
Meaning in display mode C
In display mode C, the port LEDs indicate the mode.
LED color
LED status
Meaning
- Off Port operating in half duplex mode
Green
On
Port operating in full duplex mode
Meaning in display mode D
In display mode D, the port LEDs indicate whether the port is monitored.
LED color
LED status
Meaning
- Off Port is not monitored.
If no link was established at the port the signaling contact
does not indicate an error.
Green On Port is monitored.
If no link was established at the port the signaling contact
indicates an error.
Meaning in display mode E
In display mode E, the port LEDs indicate whether the connected device is supplied using
PoE.
LED color
LED status
Meaning
-
Off
The connected device is not supplied using PoE.
Green
On
The connected device is supplied via PoE.