Description of the device
2.4 RESET button
SCALANCE XP-200
Operating Instructions, 05/2016, C79000-G8976-C428-01
33
Loss of water and dust protection
If the cover is not mounted correctly, the device is not water and dust proof.
The "RESET" button is located under the cover on the top of the SCALANCE XP-200.
Figure 2-1 Position of the "RESET" button, for example on the SCALANCE XP208
Resetting the device to factory defaults
If you reset, all the changes you have made will be overwritten by factory defaults.
An inadvertent reset can cause disturbances and failures in the configured network with
further consequences.
To Next Page
Loading...
