Siemens SCALANCE XP-200 User Manual

Introduction
SCALANCE XP-200
Operating Instructions, 05/2016, C79000-G8976-C428-01
5
SIMATIC NET glossary
Explanations of many of the specialist terms used in this documentation can be found in the
SIMATIC NET glossary.
You will find the SIMATIC NET glossary on the Internet at the following address:
50305045 (http://support.automation.siemens.com/WW/view/en/50305045
)
Catalogs
You will find the order numbers for the Siemens products of relevance here in the following
catalogs:
● SIMATIC NET Industrial Communication / Industrial Identification, catalog IK PI
● SIMATIC Products for Totally Integrated Automation and Micro Automation, catalog
ST 70
● Industry Mall - catalog and ordering system for automation and drive technology, Online
catalog
(
https://eb.automation.siemens.com/goos/WelcomePage.aspx?regionUrl=/en&language=
en)
You can request the catalogs and additional information from your Siemens representative.
Unpacking and checking
WARNING
Do not use any parts that show evidence of damage
If you use damaged parts, there is no guarantee that the device will function according to
the specification.
If you use damaged parts, this can lead to the following problems:
• Injury to persons
• Loss of the approvals
• Violation of the EMC regulations
• Damage to the device and other components
Use only undamaged parts.
1. Make sure that the package is complete.
2. Check all the parts for transport damage.

Siemens SCALANCE XP-200 Specifications

General

Brand	Siemens
Model	SCALANCE XP-200
Category	Switch
Language	English