5.3 Error profiles
Error in the configuration of the advertisement interval
Most of the time, these errors occur when the master router and backup router
do not have the same configuration. An example of this is when the
advertisement intervals are set to different values. If the routers receive
different advertisement intervals, then the packets will be discarded until the
problem is resolved.
Errors with the VRRP priority
If the master and backup routers initialize in the wrong order, then check the
VRRP priorities.
Both routers are in the master role
If both routers display that they are the master, then this is a serious problem
and probably indicates an error in the communication path between the
routers. You can check the communication path between the routers by
exchanging a ping command via the router's WBM.
Ping between PC and server fails
The ping to the server fails. Check the wiring of the VLAN configuration and the
IP address configuration. Also make sure that the PC is using the right
gateway address.
To Next Page
Loading...
