Approvals, certificates, standards
9.4 X-300EEC product group
SCALANCE X-300
246 Operating Instructions, 02/2012, A5E01113043-12
IEEE 1613
The product meets the requirements of the standard IEEE 1613 CLASS 1 (electrical ports) or
IEEE 1613 CLASS 2 (optical ports).
FM approval
All variants of the X-300EEC with power supply 24 V DC have the following approval:
● Factory Mutual Approval Standard Class Number 3611
● FM Hazardous (Classified) Location Electrical Equipment:
Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and
Non Incendive / Class I / Zone 2 / Group IIC / T4
Notice for Australia
The product meets the requirements of the AS/NZS 2064 standard (Class A).
cULus Approval for Industrial Control Equipment
Only the device version with the 100 to 240 VAC power supply has the cULus Ind. Cont. Eq.
approval.
cULus Listed
Underwriters Laboratories Inc. complying with
● UL 508
● CSA C22.2 No. 142-M1987
cULus Approval Hazardous Location
All variants of the X-300EEC with power supply 24 V DC have the following approval:
cULus Listed IND. CONT. EQ. FOR HAZ. LOC.
Underwriters Laboratories Inc. complying with
● CSA C22.2 No. 213-M1987
● UL 1604 and UL 2279
or ANSI/ISA 12.12.01
Approved for use in
Cl. 1, Div. 2, GP. A, B, C, D, T4
Cl. 1, Zone 2, GP. IIC T4
To Next Page
Loading...
