Assembling
4.2 Types of installation
SCALANCE XR-500
40 Operating Instructions, 05/2017, A5E03275845-11
Types of installation
Mounting the IE switches
For the devices, you have the following options:
● 19" rack mounting
● Desktop operation with adhesive feet
● Secured at 4 points using special mounting brackets
Mounting modular components
For the modular components, you have the following options:
● Plugging/pulling media modules in the module slots
● Inserting/removing SFP transceivers in media modules for SFP or SFP+ slots
● Inserting/removing SFP+ transceivers in SFP+ slots
● Mounting power supply units
19" rack mounting
Notes on 19" rack mounting
Increased ambient temperature
When installed in a closed rack or a rack unit with several devices, the ambient temperature
of the rack may be higher than the room temperature. Install the devices in an environment
compatible with the maximum ambient temperature specified by the manufacturer.
Install the devices in a rack so that there is an adequate air flow for the reliable operation of
the devices.
When installing the devices in a rack, avoid the dangers of unequal mechanical load.
To Next Page
Loading...
