Assembling
4.5 Four-point mounting
SCALANCE XR-500
Operating Instructions, 05/2017, A5E03275845-11
45
To install a SCALANCE XR-500 on a ship horizontally, you require special mounting
brackets. You will find the design drawings for constructing the mounting brackets in the
section "Mounting brackets for use on ships (Page 97)".
Brackets for the SCALANCE XR524-8C and SCALANCE XR526-8C
With the SCALANCE XR524-8C and SCALANCE XR526-8C you can use the same
brackets.
The brackets for left and right are identical.
You can also use the mounting brackets intended for 19" rack mounting for the four-point
mounting. Two suitable brackets ship with the device. Make the two missing mounting
brackets according to the design drawings.
Brackets for the SCALANCE XR528-6M and SCALANCE XR552-12M
For SCALANCE XR528-6M and SCALANCE XR552-12M, you require different mounting
brackets. The mounting brackets on one side are identical but the mounting brackets for left
and right are different.
How to distinguish the mounting brackets is described in the section "Mounting brackets for
use on ships (Page 97)".
Make the four mounting brackets according to the design drawings.
To Next Page
Loading...
Need help?
General