Siemens Sensformer IPS-601-20WGI - Page 2

Manual for installation of the Sensformer® Connectivity Device
© 2020 Siemens Energy Page 1
History
Version
Date
Released by
Change description
1.0
05.02.2018
Bence Bodnár
• 1
st
revision of document
2.0
02.04.2018
Bence Bodnár
• 1
st
official documentation status
2.1
25.10.2018
Gergő Kovács
• Firmware 2.0.0 changes
2.2
08.05.2019
Bence Bodnár
• Clarifications
3.0
08.07.2019
Bence Bodnár
• Transcription for v2 version
4.0
25.10.2019
Bence Bodnár
• Transcription for v3 version
5.0
06.11.2019
Bence Bodnár
• Clarifications
6.0
12.11.2019
Bence Bodnár
• Addition
6.1
22.11.2019
Bence Bodnár
• Clarifications
7.0
03.02.2020
Bence Bodnár
• Addition
7.1
12.02.2020
Bence Bodnár
• Clarifications
7.2
13.02.2020
Bence Bodnár
• Clarifications
7.3
19.02.2020
Bence Bodnár
• Clarifications
8.0
08.06.2020
Bence Bodnár
• Clarifications
8.1
30.06.2020
Ladislav Takác
• Clarifications, model description, other
9.0
06.07.2020
Bence Bodnár
• Clarifications
10.0
07.07.2020
Ladislav Takác
• Update, conduit hubs, outdoor version, models
10.1
20.08.2020
Ladislav Takác
• Clarification
11.0
28.08.2020
Ladislav Takác
• Outdoor version device removed
11.1
31.08.2020
Ladislav Takác
• Clarification
11.2
10.09.2020
Ladislav Takác
• Clarification of technical data
11.3
05.11.2020
Bence Bodnár
• Clarification of technical data of PT100
11.4
24.01.2021
Ladislav Takác
• FCC related information added