Siemens Servo Ventilator 300 - Assembling the control section; Assembling the panel section to the control section

3
92 Siemens-Elema AB E382 E380E 061 01 03 01
Disassembling and assembling Servo Ventilator 300/300A
Assembling the control
section
The procedure for assembling the control
section is the reverse of the disassembly
procedure previously performed.
The following points must be noted during
assembling:
PC boards
• The PC boards are mounted in different
types of guides. Make sure that the
PC boards are correctly supported by
these guides.
• The PC board connectors on the control
interconnection board PC 1617 are not
symmetrically mounted. The connectors
can be damaged if a PC board is mounted
in wrong position.
Assembling the panel
section to the control section
The procedure for assembling the panel
section to the control section is the reverse
of the separating procedure previously
performed.