Siemens SIMATIC ET 200AL - 2 xCount DQ and Control Behavior; DQ Behavior and Control Explanations

IM 157-1 DP (6ES7157-1AA00-0AB0)
Equipment Manual, 08/2021, A5E32100641-AE
41
Technical specifications
6
Technical specifications of the interface module IM 157-1 DP
The following table shows the technical specifications as of the issue date. You can find a
data sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/ww/en/pv/6ES7157-1AA00-0AB0/td?dl=en).
Article number
6ES7157-1AA00-0AB0
General information
Product type designation
IM 157-1 DP
HW functional status
FS02
Firmware version
V1.0.x
Vendor identification (VendorID)
81A9H
Product function
• I&M data
Yes; I&M0 to I&M3
Engineering with
• STEP 7 TIA Portal configurable/integrated
from version
STEP 7 V13 SP1 or higher
• STEP 7 configurable/integrated from ver-
sion
From V5.5 SP4 Hotfix 3
• PROFIBUS from GSD version/GSD revision
GSD as of Revision 5
Configuration control
via dataset
Yes
Supply voltage
Load voltage 1L+
• Rated value (DC)
24 V
• permissible range, lower limit (DC)
20.4 V
• permissible range, upper limit (DC)
28.8 V
• Reverse polarity protection
Yes; against destruction
Input current
Current consumption (rated value)
50 mA
from load voltage 1L+ (unswitched voltage)
4 A; Maximum value
from load voltage 2L+, max.
4 A; Maximum value
Power loss
Power loss, typ.
1.7 W
Address area
Address space per station
• Address space per station, max.
244 byte
Interfaces
Number of PROFIBUS interfaces
1