Siemens SIMATIC HMI KTP400 User Manual

4 Installation and Commissioning
House Control and Weather Sensors - LOGO! Set 11
Entry ID: 68585346, V2.1, 09/2018
26
 Siemens AG 2018 All rights reserved
No.
Action/response
WinCC Basic
9.
Proceed as follows:
1. Click on the "Alarm
window” to open its
properties.
2. Go to the "Properties" tab
and make sure that the
warning messages (here
for wind) which you have
configured, are enabled
under "Current alarm
states” and
"Unacknowledged alarms”.
10.
Once you have completed all
changes and modifications of
the warning messages, click
"Load” in the toolbar to load the
project to the KTP700.

Siemens SIMATIC HMI KTP400 Specifications

General

Display Type	TFT LCD
Resolution	480 x 272 pixels
Color Depth	64k colors
Operating Temperature	0 to 50°C
Storage Temperature	-20 to 60°C
Voltage Supply	24 V DC
Mounting Type	Panel Mount
Number of Keys	4 function keys
Touchscreen	Yes
Relative Humidity	10% to 90% (non-condensing)
Protection Class	IP65 (front)
Communication Interfaces	PROFINET, USB