Siemens SIMATIC HMI KTP400 User Manual

2 Solution
House Control and Weather Sensors - LOGO! Set 11
Entry ID: 68585346, V2.1, 09/2018
6
 Siemens AG 2018 All rights reserved
In the automation solution, a weather station is connected to the LOGO! Set 9 /
Set 10 hardware setup. The weather station consists of a LOGO! 8 (1), a LOGO!
power supply (3), a Compact Switch module (2) and a SIMATIC HMI KTP400
Basic Panel (4). The SIMATIC HMI KTP400 Basic Panel will be called "KTP400”.
Advantages/benefits
 Weather dependent controlling and monitoring of a house control with
LOGO! 8, weather sensors and Touch Panel
 Individually setting each of the blinds also possible in automatic mode
 Minimizing wind damage at the blinds
 Cost reduction through efficient room temperature with internal and external
temperature comparison
 Additional option to control the functionalities of the application on the PC via
the WinCC Basic Panel simulation function
2.2 Hardware and software components
Note
Please note that in this LOGO! Set, the LOGO! Set 9 and LOGO! Set 10
hardware setup is expanded by a weather station with a LOGO! 8 and a Basic
Panel.
Detailed information on the LOGO! Set 9 / Set 10 hardware setup can be found
in the LOGO! Set 9 documentation under entry ID 64143308 and in the LOGO!
Set 10 documentation under entry ID 68585344.

Siemens SIMATIC HMI KTP400 Specifications

General

Display Type	TFT LCD
Resolution	480 x 272 pixels
Color Depth	64k colors
Operating Temperature	0 to 50°C
Storage Temperature	-20 to 60°C
Voltage Supply	24 V DC
Mounting Type	Panel Mount
Number of Keys	4 function keys
Touchscreen	Yes
Relative Humidity	10% to 90% (non-condensing)
Protection Class	IP65 (front)
Communication Interfaces	PROFINET, USB