Comfort Panels INOX, ITC INOX
Compact Operating Instructions, 09/2017, A5E33472156-AI
13
Installing and connecting the device
The technical specifications given for the device are guaranteed:
● If the device is installed by qualified personnel
● If the installation is performed as specified in this document
Preparing for installation
3.2.1
Check the scope of delivery
Check the scope of delivery for visible signs of damages caused during transport and for
completeness, see chapter "Scope of delivery (Page 8)".
A damaged part can cause device malfunctions.
Do not install damaged parts.
In the case of damaged parts or incomplete delivery, contact your Siemens representative.
Checking the operating conditions
Note the following aspects before installing the device:
1. Familiarize yourself with the standards, approvals, EMC parameters and technical
specifications for operation of the device. This information is available in the following
chapters:
– "Certificates and approvals (Page 26)"
– See the operating instructions for electromagnetic compatibility
2. Check the mechanical and climatic ambient conditions for operation of the device; see
Classification of environmental conditions (Page 36).
3. Follow the notes on use in the operating instructions.
To Next Page
Loading...
Need help?
General
