Siemens SIMATIC INOX Series User Manual

Technical specifications
5.4 Classification of environmental conditions
Comfort Panels INOX, ITC INOX
40 Compact Operating Instructions, 09/2017, A5E33472156-AI
Test
Physical variable
Value
Fall
EN 60068-2-31:2009
Test Ec
Fall height
1.0 m
Number of strains 5
Tests for climatic environmental conditions during operation
The following table shows the type and scope of the tests of the device with regard to
climatic environmental conditions.
Environmental condition
Physical variable
Value
Cold test
EN 60068-2-1:2007-03
Test Ad
Temperature 0 °C
Duration
16 h
Speed of the temperature change 10 K/h
Warm test, dry
EN 60068-2-2:2007-07
Test Bd
Temperature
• TP700/900/1200/1500 Comfort INOX
50 °C
• TP1900 Comfort INOX, ITC1900 INOX
45 °C
Duration 96 h
Speed of the temperature change
10 K/h
5.4.5
Climate diagram
The diagram below shows the extended range for temperature and humidity in uninterrupted
duty based on IEC 60721-3-3 class 3K3 using the TP700/TP900 Comfort INOX as an
example. Information on the maximum permitted humidity of the other devices is available in
the section "Classification for stationary and weather-protected use (Page 38)".
The information applies to a device installed in landscape without inclination.
Red: Extended temperature range of 7-15" devices; see section
"Selecting a mounting position (Page 14)".

Siemens SIMATIC INOX Series Specifications

General

Brand	Siemens
Model	SIMATIC INOX Series
Category	Touch Panel
Language	English