Comfort Panels INOX, ITC INOX
Compact Operating Instructions, 09/2017, A5E33472156-AI
3
These compact operating instructions apply to the following devices which are based on the
following standard devices:
TP700 Comfort INOX, article number 6AV2144-8GC10-0AA0
TP900 Comfort INOX, article number 6AV2144-8JC10-0AA0
TP1200 Comfort INOX, article number 6AV2144-8MC10-0AA0 TP1200 Comfort
TP1500 Comfort INOX, article number 6AV2144-8QC10-0AA0
TP1900 Comfort INOX, article number 6AV2144-8UC10-0AA0
ITC1900 INOX, article number 6AV6646-8AC10-0AA0
These compact operating instructions describe the technical differences between the INOX
devices and the corresponding basic devices.
The notes in these compact operating instructions take precedence over statements in the
basic operating instructions, the release notes and online help.
Comfort Panels operating instructions
(http://support.automation.siemens.com/WW/view/en/49313233
)
Industrial Thin Clients operating instructions
(http://support.automation.siemens.com/WW/view/en/61187980
)
Unless otherwise described in this document, all of the statements made in the general
operating manual concerning the basic device are valid for the corresponding INOX device.
This means the statements on hardware, operating system, software, configuration,
maintenance, and servicing.
Note
This document belongs to the device and will also be required for repeat commissioning.
Keep all supplied and supplementary documentation for the entire service life of the device.
Pass on all of these documents to a future owner of the device.
To Next Page
Loading...
Need help?
General
