Siemens SIMATIC IOT2050 Starterkit - 5 Installing the IOT2000 Input;Output Module

SIMATIC IOT2050 Starterkit
20 Product Information, 06/2021, A5E50831253-AA
Installing the IOT2000 Input/Output Module
5
Note
If the equipment is used in manner not specified by the manufacture, the protection provided
by the equipment may be impaired.
Requirements
• IOT2050 is disconnected from the power supply.
WARNING
Risk of fire and electric shock
The on/off switch does not isolate the device from the power supply. Risk of electric shock if
the device is opened incorrectly or defective. There is also a risk of fire if the device or
connecting lines are damaged. Death or serious bodily injury can result.
You should therefore protect the device as follows:
• Always pull out the power plug when you are not using the device or if the device is
defective. The power plug must be freely accessible.
•
Use a central power isolating switch for cabinet installation.