Siemens SIMATIC IPC227G User Manual

Expanding and assigning parameters to the device
5.2 Installing the M.2 Module
SIMATIC IPC227G
Operating Instructions, 07/2022, A5E50059933-AC
45
Installation of the M.2 Module in our device should not exceed the specified maximum
outline or the maximum allowed power dissipation. The following table contains the detailed
features and functions of the M.2 Module:
Module
M.2 Module 1
(Slot X100)
M.2 Module 2
(Slot X101)
Features and function
Size
2230, 2242, 2260, 2280, 3030, 3042,
3052
2230, 2242, 2260, 3030, 3042
Interface
Key B/Key B+M
Channel
1 × PCIe 3.0 (2 lanes) + 1 × USB 2.0
Support NVRAM
1
No
Yes
Support WLAN module
2
, like Wi-Fi
Yes
Yes
Support WWAN module
3
, like LTE/ 5G
Yes
No
Support Field Bus
Yes
Yes
Support 2nd NVMe SSD
Yes
Yes
Support AI
Yes
Yes
Support Special (DIO)
Yes
Yes
1
: Our device either supports NVRAM or Coral AI Accelerator card (Page 95) in the hazardous
location.
2
: Our device supports Key E and Key A+E module through the "M.2 Key E to Key B adapter" in
the accessory (Page 13).
3
: You can through the SIM card slot to install the 4G/5G SIM card to connect to the network.
But SIM card function has not been certified in both ordinary location and hazardous location.
Requirement
• The device is opened.
• A T8 screwdriver

Siemens SIMATIC IPC227G Specifications

General

Brand	Siemens
Model	SIMATIC IPC227G
Category	Industrial PC
Language	English