Technical specifications
7.1 Certificates and approvals
SIMATIC IPC227G
Operating Instructions, 07/2022, A5E50059933-AC
63
UKCA
The device complies with the designated British standards (BS) for IPC published in the official
consolidated list of the British Government. The device meets the requirements and
protection targets of the following regulations and related amendments:
• Electrical Equipment (Safety) Regulations 2016 (Low-Voltage)
• Electromagnetic Compatibility Regulations 2016 (EMC)
• Regulations on the restriction of the use of certain hazardous substances in electrical and
electronic equipment 2012 (RoHS).
• Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres
Regulations 2016 (Explosion Protection)
UK Declarations of Conformity for the respective authorities are available from:
Siemens AG
Digital Industries
Factory Automation
DI FA TI COS TT
P.O. Box 1963
D-92209 Amberg
The UK Declaration of Conformity is also available for download from the Siemens Industry
Online Support website under the keyword "Declaration of Conformity".
cULus HAZ. LOC. approval in file No.E472610
The following approvals are available for the device when specified as such on the
nameplate:
Underwriters Laboratories Inc. according to
• UL 121201
• CSA C22.2 No. 213-17
Approved for use in
• Class I, Division 2, Group A, B, C, and D or non-hazardous locations only
• Temperature code (T-Code) – T4.
Observe the following note:
This product must be installed according to the NEC (National Electric Code) stipulations.
When used in environments according to class I, division 2 (see above), the device must be
mounted in an enclosure that corresponds to at least IP54 according to EN 60529.
To Next Page
Loading...
Need help?
General
