Configuring the operating system
5.8 Displaying licensing information for the HMI device
KTP400 Basic, KTP600 Basic, KTP1000 Basic, TP1500 Basic
56 Operating Instructions, 08/2008, A5E01075587-01
5.8 Displaying licensing information for the HMI device
1. Use the "OP" button to open the
"OP Properties" dialog.
2. Open the "License" tab.
The "License" tab is used to display the
licensing information for the software of the
HMI device.
3. Close the dialog with "OK."
To Next Page
Loading...
