Siemens SIMATIC NET RUGGEDCOM RSG2100 - 2.5.2 Wiring Examples

Installing the Device
2.5.2Wiring Examples
3
#6 Ring Lug
Figure2.6 Chassis Ground Connection
DANGER
Electrocution hazard – risk of death, serious personal injury and/or damage
to the device
Make sure the supplied terminal block cover is always installed before the
device is powered.
8. Install the terminal block cover.
2.5.2 Wiring Examples
The following illustrate how to connect power to single and dual power supplies.
Figure2.7 Single AC Power Supply
RUGGEDCOM RSG2100
Installation Manual, 11/2022, C79000-G8976-1040-20
17