Siemens SIMATIC NET RUGGEDCOM RSG2100 - SFP Transceivers

Communication Ports
4.3SFP Transceivers
21
1
Tx Connector
2
Rx Connector
Figure4.5 MTRJ Port
21
1
Tx Connector
2
Rx Connector
Figure4.6 LC Port
21
1
Tx Connector
2
Rx Connector
Figure4.7 SC Port
21
1
Tx Connector
2
Rx Connector
Figure4.8 ST Port
For specifications on the available fiber optic Ethernet ports, refer to "Fiber Optic
Ethernet Port Specifications" (Page 33).
4.3 SFP Transceivers
The RUGGEDCOM RSG2100 supports up to two Small Form-Factor Pluggable (SFP)
transceiver sockets, which are compatible with a wide array of SFP transceivers
available from Siemens.
LEDs
Each socket features an LED that indicates its link state.
State Description
Yellow (Solid) Link established
Yellow (Blinking) Activity
Off No link detected
Compatible SFP Transceivers
For more information about which SFP transceivers are compatible with the
RUGGEDCOM RSG2100, as well as instructions for ordering and installation/
removal, refer to the "RUGGEDCOM SFP Transceiver Catalog [https://
support.industry.siemens.com/cs/ca/en/view/109482309]".
26
RUGGEDCOM RSG2100
Installation Manual, 11/2022, C79000-G8976-1040-20