Siemens SIMATIC NET RUGGEDCOM RST916C - Page 21

Installing the Device
2.3.2Mounting the Device to a Panel
2
Side-Mount Orientation
Figure2.3 Panel Mount Options
To mount the device to a panel, do the following:
1. Secure the mounting adapters to the top and bottom of the device in the desired
orientation using the eight M4 screws included with the device.
2
1
2
1
1
Screw (M4)
2
Panel Mount Adapter
Figure2.4 Panel Mount Adapter Assembly
2. Prepare mounting holes in the panel where the device is to be installed.
3. Place the device against the panel and align the adapters with the mounting
holes.
12
RUGGEDCOM RST916C
Installation Manual, 04/2023, C79000-G8976-1490-07