Certification
6.1.9ISO
Notices specific to the RRA:
WARNING
Class A Equipment (Industrial Broadcasting and Communication Equipment)
This device complies with the limits of a Class A electromagnetic wave device and
is intended for use outside of a residential environment. The seller or user must be
aware.
6.1.9 ISO
This device was designed and manufactured using a certified ISO (International
Organization for Standardization) quality program that adheres to the following
standard:
• ISO 9001:2015
Quality management systems – Requirements
6.1.10 RoHS
This device is declared by Siemens Canada Ltd. to meet the requirements of the
following RoHS (Restriction of Hazardous Substances) directives for the restricted use
of certain hazardous substances in electrical and electronic equipment:
• EU RoHS Directives (EU) 2011/65 and (EU) 2015/863
European Directive for Restriction of Hazardous Substances
• China RoHS (relating to SJ/T 11364)
Management Methods for the Restriction of the Use of Hazardous Substances in
Electrical and Electronic Products
Declarations of conformity for each directive are available online via Siemens
Industry Online Support [https://support.industry.siemens.com/]>.
6.1.11 Other Approvals
This device meets the requirements of the following additional standards:
• IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications
Networking Devices in Electric Power Substations
• IEC 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
• IEC 61850-3
Communication Networks and Systems in Substations – Part 3: General
Requirements
38
RUGGEDCOM RST916C
Installation Manual, 04/2023, C79000-G8976-1490-07
To Next Page
Need help?
General