Certification
6
The RUGGEDCOM RST916C device has been thoroughly tested to guarantee its
conformance with recognized standards and has received approval from recognized
regulatory agencies.
6.1 Approvals
This section details the standards to which the RUGGEDCOM RST916C complies.
Note
All relevant certificates and test reports are available on Siemens Industry Online
Support [https://support.industry.siemens.com/cs/ww/en/ps/16008/cert].
6.1.1 UKCA
This device is certified for use in Great Britain and bears the United Kingdom Certified
Assessed (UKCA) marking. The marking is printed on the body of the device.
6.1.2 CSA
This device meets the requirements of the following Canadian and U.S. standards
under certificate 21CA80047239:
• CAN/CSA C22.2 No. 62368-1-07 AMD 2:2014
Information Technology Equipment – Safety – Part 1: General Requirements
• ANSI/UL 62368-1-2014
Information Technology Equipment – Safety Part 1: General Requirements
The device is marked with a CSA symbol that indicates compliance with both
Canadian and U.S. requirements.
RUGGEDCOM RST916C
Installation Manual, 04/2023, C79000-G8976-1490-07
35
To Next Page
Need help?
General