Technical Specifications
5.3Supported Networking Standards
5.3 Supported Networking Standards
The following networking standards are supported by RUGGEDCOM RST916C:
Standard 10 Mbps 100
Mbps
1000
Mbps
10000
Mbps
Description
IEEE 802.1AB
Link Layer Discovery
Protocol (LLDP)
IEEE 802.1D
MAC bridges, Spanning
Tree Protocol (STP)
IEEE 802.1Q
VLAN (Virtual LAN)
IEEE 802.1Q-2005
Multiple Spanning
Tree Protocol (MSTP)
IEEE 802.1w
Rapid Spanning
Tree Protocol (RSTP)
IEEE 802.1p
Class of Service (CoS)
IEEE 802.1x
Port-based network
access control
IEEE 802.3
10Base-T
IEEE 802.3u
100Base-TX/100Base-FX
IEEE 802.3z
1000Base-SX/LX
IEEE 802.3ab
1000Base-TX
IEEE 802.3ad
Link aggregation
IEEE 802.3ae
10GBase
IEEE 802.3x
Flow control
IEEE 1588-2008
Precision Time Control
(PTP) Version 2
IEC 62439-2:2016
Media Redundancy
Protocol (MRP)
5.4 Copper Ethernet Port Specifications
The following details the specifications for copper Ethernet ports that can be ordered
with the RUGGEDCOM RST916C.
Speed
a
10/100/1000Base-TX
Connector RJ45
Duplex
a
FDX/HDX
Cable Type
b
CAT 5E or higher
Wiring Standard
c
TIA/EIA T568A/B
Maximum Distance
d
100 m (328 ft)
Isolation
e
1.5 kV
a
Auto-negotiating.
b
Shielded.
c
Auto-crossover and auto-polarity.
d
Typical distance. Dependent on the number of connectors and splices.
30
RUGGEDCOM RST916C
Installation Manual, 04/2023, C79000-G8976-1490-07
To Next Page
Loading...
Need help?
General