Siemens SIMATIC NET SCALANCE W700 Series User Manual

Configuring with Web Based Management
5.5 "System" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 03/2015, C79000-G8976-C267-08
159
Description
The table has the following columns:
●
Type
Shows the certificate.
●
Description
Shows a short description of the certificate.
●
Enabled
Specifies whether the certificate needs a password. If you enable the setting, specify the
password in "Password".
●
Password
Enter the password for the certificate.
Note
When assigning the password, you can only use the following readable ASCII characters:
0x20
- 0x7e.
●
Password Confirmation
Confirm the password.
●
Status
Shows whether the current settings for the certificate match the device.
–
Valid
The settings are valid. The password matches the certificate.
–
Invalid
The settings are invalid.
Procedure
Assigning the password
1. Enter the password in "Password".
2. To confirm the password, enter the password again in "Password Confirmation".
3. Select the "Enabled" option.
4. Click the "Set Values" button.

Siemens SIMATIC NET SCALANCE W700 Series Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE W700 Series
Category	Wireless Access Point
Language	English