Configuring with Web Based Management
5.7 "Layer 2" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 03/2015, C79000-G8976-C267-08
247
1. Enter an ID in the "VLAN ID" input box.
2. Click the "Create" button. A new entry is generated in the table. As default, the boxes
have "-" entered.
3. Enter a name for the VLAN under Name.
4. Specify the use of the port in the VLAN. If, for example you select M, the port is a
member of the VLAN. The frame sent in this VLAN is forwarded with the corresponding
VLAN tag.
5. Specify the mode of the device.
6. Click the "Set Values" button.
To Next Page
Loading...
Need help?
General
