Siemens SIMATIC PCS 7 - Mutual Monitoring between CPU and TPM 478-2

4-20
Connecting TM I/O to PCS 7
C79000-G8076-C710-04
4.9.5 Mutual Monitoring between CPU and TPM 478-2
With the following configuration of a pseudo module within the DB1 data
block of the FM456-4 the mutual monitoring between CPU and TPM 478-2
can be switched on/off:
Module type: TPM478:NO_WATCHD
Cycle: n = 0 or n > 0, with:
n = 0 (default value): Monitoring is deactivated.
n > 0: Monitoring is activated.
Confi
g
uration