Siemens Simatic S7-1500

Hardware section
2.4 Power on
S7-1500
Getting Started, 05/2014, A5E03981761-AC
33
2.4.3
Assign IP address via the display
In this step you set the IP address and the subnet mask for the CPU.
Procedure
1. Navigate to "Settings".
2. Select "Addresses".
3. Select the interface "X1 (IE/PN)".
4. Select the menu item "IP Addresses".
5. Set the IP address 192.168.0.10.
6. Press the "right" arrow key on the module.
7. Set the subnet mask 255.255.255.0.
8. Press the "down" arrow key on the module to select the menu item "Apply" and confirm
the setting with "OK"
Result
You have now assigned an IP address and the subnet mask for the interface "X1 (IE/PN)".