Siemens Simatic S7-1500

Software section
3.2 Creating the program
S7-1500
54 Getting Started, 05/2014, A5E03981761-AC
3.2.5
Copying tag tables
Introduction
In the following section, you will insert the tag tables from the "ProgLib_ColorFillingStation"
global library into your project.
Procedure
1. Open the "PLC tags" folder in the project navigation.
2. Open the "PLC_tags" folder.
3. Drag-and-drop the tag table to be imported from the global library to the "PLC tags"
folder.
4. Proceed as described in step 3 for the other tag tables.
Result
The tag tables are inserted in the project folder of the same name.