Siemens Simatic S7-1500

Software section
3.1 Creating the project and hardware
S7-1500
38 Getting Started, 05/2014, A5E03981761-AC
3.1.3
Creating an S7-1500 CPU
Introduction
In the following step, you will create an unspecified CPU. Unspecified CPUs are
placeholders for specific CPUs from the hardware catalog which will be defined later.
Procedure
1. Open the "Devices & Networks" portal.
2. Insert a new device.
3. Enter "Color_Mixing_CPU" as the name for the CPU.
4. Open the "SIMATIC S7-1500" folder.