Siemens Simatic S7-1500

Assignment Side nameplate Front nameplate Label on bottom
cover
MAC address 2 Port X150P1R
(needed for LLDP, for example)
- - -
MAC address 3 Port X150P2R
(needed for LLDP, for example)
- - -
MAC address 4 Port X150P3
(needed for LLDP, for example)
- - -
MAC address 5 PROFINET interface X160
(visible in STEP7 in accessible
devices)
MAC address labeled DMC with MAC
addresses
MAC address
labeled
MAC address 6 Port X160P1
(needed for LLDP, for example)
- - -
MAC address 7 PROFINET interface X130
(visible in STEP7 in accessible
devices)
MAC address labeled DMC with MAC
addresses
MAC address
labeled
MAC address 8 Port X130P1
(needed for LLDP, for example)
- - -
DMC: Data Matrix Code
"-" means: MAC address is not labeled or marked
See also
Covers (Page 35)
4.3 PROFIBUS X126
The SIMATIC Drive Controller has a PROFIBUS DP interface (X126).
47
Connecting
4.3 PROFIBUS X126
SIMATIC Drive Controller
Equipment Manual, 11/2022, A5E46600370-AC