Siemens Simatic S7-1500 - Introduction

SIMATIC Drive Controller
Equipment Manual, 11/2022, A5E46600370-AC
6
Introduction
1
Purpose of the documentation
This equipment manual supplements the system manual of the SIMATIC Drive Controller
family of controllers. It contains a concise description of the SIMATIC Drive Controller
hardware and, in addition to the product overview, includes information on:
•
Interfaces
•
Wiring diagrams
•
Display and operator controls
•
Technical specifications
In the SIMATIC Drive Controller system manual, you will find information on configuring,
installing, wiring and commissioning the SIMATIC Drive Controller, among other things.
All cross-system functions, such as motion control and communication functions, are
described in the function manuals.
The information provided in this manual and the system manual enables you to commission
the SIMATIC Drive Controller.
Conventions
STEP7: In this documentation, "STEP7" is used as a synonym for all versions of the
configuration and programming software "STEP7 (TIAPortal)".
Also take note of information labeled as follows:
NOTE
A note contains important information on the product described in the documentation, on
the handling of the product or on the section of the documentation to which particular
attention should be paid.