Siemens Simatic S7-1500

SIMATIC Drive Controller
Equipment Manual, 11/2022, A5E46600370-AC
58
Interrupts, diagnostics alarms, error messages and
system alarms
5
5.1 Status and error displays
5.1.1 Overview
Location of status displays
The figure below shows the location of the status displays on the SIMATIC Drive Controller.
LEDs ① to ③ indicate the operating states of the CPU. LEDs ④ and ⑤ indicate the operating
states of SINAMICS Integrated. The 7-segment display ⑦ shows additional status information
in certain operating states. The ACT LED ⑧ indicates write/read accesses to the SIMATIC
Memory Card.
01FS:
6ES7615-4DF10-0AB0
T-L86065647
A5E43926179



① RUN/STOP LED, green/yellow
② ERROR LED, red/yellow
③ MAINT LED, yellow
④ RDY LED, red/green/yellow
⑤ COM LED, red/green/yellow
⑥ No function
⑦ 7-segment display
⑧ ACT LED, yellow
Figure 5-1SIMATIC Drive Controller status displays