Siemens Simatic S7-1500H - Page 307

Table 11-19Record structure for I&M identification data
Identification data Access Example Explanation
Identification data 0: (record index AFF0
H
)
VendorIDHigh Read (1 bytes) 0000
H
VendorIDLow Read (1 bytes) 002A
H
Vendor name
(002A
H
= SIEMENSAG)
Order_ID Read (20 bytes) 6ES7515-2RM00-0AB0 Article number of module
(for example CPU1515R‑1PN)
IM_SERIAL_NUMBER Read (16 bytes) - Serial number (device-specific)
IM_HARDWARE_REVISION Read (2 bytes) 1 corresponds to hardware version
(e.g. 1)
IM_SOFTWARE_REVISION Read Firmware version
• SWRevisionPrefix (1 byte) V
• IM_SWRevision_Functional_E
nhancement
(1 byte) 0000
H
- 00FF
H
• IM_SWRevision_Bug_Fix (1 byte) 0000
H
- 00FF
H
• IM_SWRevision_Internal_
Change
(1 byte) 0000
H
- 00FF
H
Provides information about the firmware
version of the module (e.g. V1.0.0)
IM_REVISION_COUNTER Read (2 bytes) 0000
H
Provides information about parameter
changes on the module
(not used)
IM_PROFILE_ID Read (2 bytes) 0000
H
Generic Device
0001
H
CPUIM_PROFILE_SPECIFIC_TYPE Read (2 bytes)
0003
H
I/O modules
IM_VERSION Read
• IM_Version_Major (1 byte)
• IM_Version_Minor (1 byte)
0101
H
Provides information on the ID data ver
sion
(0101
H
= Version 1.1)
IM_SUPPORTED Read (2 bytes) 000E
H
provides information about the available
identification and maintenance data
(I&M1 to I&M3)
Maintenance data 1: (Record index AFF1
H
)
IM_TAG_FUNCTION Read/write (32
bytes)
- Enter an identifier for the module here,
that is unique plant-wide.
IM_TAG_LOCATION Read/write (22
bytes)
- Enter the installation location of the mod
ule here.
Maintenance data 2: (Record index AFF2
H
)
IM_DATE Read/write (16
bytes)
YYYY-MM-DD HH:MM Enter the installation date of the module
here.
Maintenance data 3: (Record index AFF3
H
)
IM_DESCRIPTOR Read/write (54
bytes)
- Enter a comment about the module here.
307
Commissioning
11.8 Identification and maintenance data
S7-1500R/H redundant system
System Manual, 11/2022, A5E41814787-AD