Siemens Simatic S7-1500H - Shipping and Storage Conditions

Emission of radio interference
Interference emission of electromagnetic fields in accordance with EN55016
Table 15-4Interference emission of electromagnetic fields
Frequency Interference emission Measuring distance
30 MHz to 230 MHz <40dB (µV/m) QP 10m
230 MHz to 1000 MHz <47dB (µV/m) QP 10m
From 1GHz to 3GHz <76dB (µV/m) P 3m
From 3GHz to 6GHz <80dB (µV/m) P 3m
Interference emission via the AC power supply in accordance with EN55016.
Table 15-5Interference emission via the AC power supply
Frequency Interference emission
0.15 MHz to 0.5 MHz <79dB (µV) Q
<66dB (µV) M
0.5 MHz to 30 MHz <73dB (µV) Q
<60dB (µV) M
15.3 Shipping and storage conditions
Introduction
The S7-1500R/H redundant system meets the specifications regarding shippings and storage
conditions pursuant to IEC61131-2. The following information applies to modules that are
shipped and/or stored in their original packaging.
Shipping and storage conditions for modules
Table 15-6Shipping and storage conditions
Type of condition Permissible range
Free fall (in shipping package) ≤1m
Temperature from -40 °C to +70 °C
Barometric pressure From 1140 to 660hPa (corresponds to an eleva
tion of -1000 to 3500m)
Relative humidity 5% to 95%, without condensation
Sinusoidal vibrations in accordance with IEC
60068‑2-6
5 - 8.4Hz: 3.5 mm
8.4 - 500Hz: 9.8m/s
2
Shock in accordance with IEC60068-2‑27 250 m/s
2
, 6 ms, 1000 shocks
360
S7-1500R/H redundant system
System Manual, 11/2022, A5E41814787-AD
Technical specifications
15.3 Shipping and storage conditions