To display the uploaded image in the correct aspect ratio, use images with the following
dimensions depending on the CPU:
Table 12-4Dimensions
CPU Dimensions Supported formats
CPU 1513R-1 PN 128 x 120 pixels Bitmap, JPEG, GIF, PNG
CPU 1515R-2 PN 240 x 260 pixels Bitmap, JPEG, GIF, PNG
CPU 1517H-3 PN 240 x 260 pixels Bitmap, JPEG, GIF, PNG
CPU 1518HF-4 PN 240 x 260 pixels Bitmap, JPEG, GIF, PNG
If the uploaded image exceeds the specified dimensions, the display shows only part of the
image. The "Adapt logo" option in STEP7 allows you to reduce the image to the specified
dimensions. However, note that the original aspect ratio of the image is not retained in such
cases.
Displaying image on the display
To display the uploaded image on the display of the CPU, press the ESC key in the main
screen of the display. When you upload an image and are in the main screen, the display
automatically shows the image after 60 seconds. To hide the image again, press any key on
the display.
Available language settings
You can set the following languages separately for menu and message texts:
•
Chinese
•
German
•
English
•
French
•
Italian
•
Japanese
•
Korean
•
Portuguese (Brazil)
•
Russian
•
Spanish
•
Turkish
You select the required language directly at the display in the "Display" menu or in STEP7 in
the hardware configuration of the CPU under "User interface languages".
Proceed as follows to display message texts on the display:
1.
Configure the project language that you want to be displayed as the interface language.
–
To do so, select a CPU and navigate to the "Multiple languages" area ("Properties >
General > Multilingual support") in the Inspector window.
–
Assign the required project languages to the interface languages.
2.
Download the message texts to the CPU as a software component.
–
To do so, select the "Consistent download" option under "Text libraries" in the "Load
preview" dialog (default).
317
Display
12.1 CPU display
S7-1500R/H redundant system
System Manual, 11/2022, A5E41814787-AD
To Next Page
Loading...
