RCM Declaration of conformity for Australia/New Zealand
The redundant S7-1500R/H system meets the requirements of the standard EN 61000-6-4.
Korea Certification
Please note that this device corresponds to limit value class A in terms of the emission of
radio frequency interference. This device can be used in all areas, except residential areas.
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기 바라며
가정 외의 지역에서 사용하는 것을 목적으로 합니다.
Marking for the Eurasian Customs Union
EAC (Eurasian Conformity)
Customs Union of Russia, Belarus and Kazakhstan
Declaration of conformity with the technical requirements of the Customs Union (TR CU).
IEC61131-2
The S7-1500R/H redundant system fulfills the requirements and criteria of standard
IEC61131‑2 (programmable logic controllers, Part 2: Equipment requirements and tests).
IEC61010-2-201
The S7-1500R/H redundant system fulfills the requirements and criteria of standard
IEC61010-2-201
(Safety requirements for electrical equipment for measurement, control, and laboratory use
Part 2-201: Particular requirements for control equipment).
PROFINET standard
The PROFINET interfaces of the redundant S7-1500R/H system are based on the standard
IEC61158 Type 10.
Marine approval
Classification societies:
•
ABS (American Bureau of Shipping)
•
BV (Bureau Veritas - French marine classification society)
•
DNV- GL (Det Norske Veritas - Germanischer Lloyd)
•
LRS (Lloyds Register of Shipping)
•
Class NK (Nippon Kaiji Kyokai)
•
CCS (China Classification Society)
357
Technical specifications
15.1 Standards and Approvals
S7-1500R/H redundant system
System Manual, 11/2022, A5E41814787-AD
To Next Page
Loading...
