EasyManuals Logo

Siemens SIMATIC S7-300 Module data Technical Data Manual

Siemens SIMATIC S7-300 Module data
252 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
Operating and display elements
2.2 Operating and display elements: CPU 31x
CPU 31xC and CPU 31x, Technical Data
2-8 Manual, 01/2006 Edition, A5E00105475-06
Slot for the SIMATIC Micro Memory Card (MMC)
Memory module is a SIMATIC Micro Memory Card. You can use MMCs as load memory and
as portable storage medium.
Note
These CPUs do not have an integrated load memory and thus require a SIMATIC Micro
Memory Card for operation.
Mode selector switch
Use the mode selector switch to set the CPU operating mode.
Table 2-4 Mode selector switch settings
Position Meaning Description
RUN RUN mode The CPU executes the user program.
STOP STOP mode The CPU does not execute a user program.
MRES CPU memory reset Mode selector switch position with pushbutton function for CPU
memory reset. A CPU memory reset by means of mode
selector switch requires a specific sequence of operation.
Reference
CPU operating modes:
STEP 7 Online Help.
Information on CPU memory reset:
Operating instructions CPU 31xC and CPU31x,
Commissioning, Commissioning Modules, CPU Memory Reset by means of Mode
Selector Switch
Evaluation of the LEDs upon error or diagnostic event:
Operating Instructions CPU 31xC
and
CPU 31x, Test Functions, Diagnostics and Troubleshooting, Diagnostics with the help of
Status and Error LEDs
Power supply connection
Each CPU is equipped with a double-pole power supply socket. The connector with screw
terminals is inserted into this socket when the CPU is delivered.

Table of Contents

Other manuals for Siemens SIMATIC S7-300 Module data

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SIMATIC S7-300 Module data and is the answer not in the manual?

Siemens SIMATIC S7-300 Module data Specifications

General IconGeneral
SeriesS7-300
ManufacturerSiemens
Protection ClassIP20
SystemSIMATIC S7-300
Digital InputsVaries by module
Digital OutputsVaries by module
Analog InputsVaries by module
Analog OutputsVaries by module
Central Processing UnitVaries by CPU model
Supply Voltage24V DC or 120/230V AC
CPU TypeVaries (e.g., CPU 312, CPU 315, etc.)
MemoryVaries by CPU model
Communication InterfacesMPI, PROFIBUS
Programming LanguagesLAD, FBD, STL, SCL, GRAPH
Operating Temperature0°C to 60°C
Storage Temperature-40°C to 70°C
Relative Humidity10% to 95% (non-condensing)

Related product manuals